Download Design and operation of radioactive waste incineration by International Atomic Energy Agency PDF

By International Atomic Energy Agency

Show description

Read or Download Design and operation of radioactive waste incineration facilities PDF

Best nuclear books

All About History: The World’s Worst Disasters

All approximately background is the stunningly realised new journal from the makers of the way it really works and All approximately area. that includes attractive illustrations, pictures and photographs depicting every little thing from old civilisations to the chilly conflict, All approximately historical past is available and enjoyable to all and makes heritage enjoyable for the entire kin.

Advances in Nuclear Science and Technology, Volume 23

Quantity 23 makes a speciality of perturbation Monte Carlo, non-linear kinetics, and the move of radioactive fluids in rocks.

Nuclear and Particle Physics: The Changing Interface

"Nuclear and Particle Physics" either were very designated topics for many years, and are actually constructing progressively more interfaces. hence, hitherto normal equipment of particle physics are followed by way of nuclear physics. The authors attempt to construct bridges among either fields and provides nuclear physicists an intensive advent from the basics of particle physics to present study during this box.

Additional info for Design and operation of radioactive waste incineration facilities

Example text

Waste transport shall comply with the national regulations for the transport of radioactive material. Such national regulations are often based on Ref. [11]. Further information can be found in Ref. [2]. Packaging and containers 706. Packaging and containerization of the waste and the ash shall minimize the possibility of the spread of radioactive contamination. The shape and size of the waste and ash containers shall be defined during the design phase of the incineration system. Consideration shall be given to the suitability of the ash container for on-site storage and direct disposal, dependent on the competent authority regulations.

An overall incineration system consists of a number of subsystems, such as waste feed, combustion chamber, off-gas treatment, and ash handling systems. Each of these subsystems consists of several components or process steps. In the overall system design, as represented by the process flow diagram, the suitability of each subsystem and its components needs to be carefully established from the viewpoint of mutual compatibility, equipment layout and system controls. Often, the interfacing requirements will dictate the final selection of components.

7. COMPONENT REQUIREMENTS GENERAL REQUIREMENTS 701. It is recognized that there may be more than one design or concept of an individual component that would meet the performance objectives of this Safety Guide. This section contains recommendations for typical components and also 27 addresses the potential alternatives where appropriate. Selection of the material for the construction of a component is very important and shall be considered such that the component can operate safely and reliably within the process parameters.

Download PDF sample

Rated 4.49 of 5 – based on 32 votes